Cshu Word
Login | Register | Cshu.reg | RSS | Google "jaw crusher machine"
中文版
Jaw Crusher  installation and commissioning
Jaw crusher is supplied by the manufacturers assembly background, the user receives the product should be carefully examined, in order to detect and eliminate possible during transport problems.
1.the crusher vibratory work, it is recommended that the machine installed in the concrete foundation, in order to reduce the vibration, the basis of accent, and the impact of nearby buildings, preferably in the middle of crusher and concrete foundation pad with hardwood pad, rubber tape or other cushioning material.
2.based on the weight of the desirability of large Zhen 5-10 times the weight of the machine, foundation, where the depth is greater than the depth of frozen land. Installed on the machine and the location of anchor bolts, see foundation plans.
3. based on row trough to the laying of a layer of metal plates, and have enough angle to avoid impeding the discharge of material after the break.
4.adjust the discharge port, should release the T-bolts, tension springs and tighten the bolts, the use of bolts from the top to open the top to adjust seat, insert, or removing the corresponding adjustment of the thickness of plate, and then returned to play the top bolts, inserting or removing the corresponding adjustment of the thickness of plate, and then returned to play the top bolts, adjust the seat the role of gravity in moving the jaw under the ear close to the seat frame, while pressure in the rope with the gasket set. Since then, adjust the spring pressure to ensure that the work, the elbow pads close to the plate and bracket, but the pre-stress should not be too large, as long as the mechanical knocking sound can not occur, and finally adjust the seat lock.
In building materials, metallurgy and chemical production in a large number of crushed material to a certain size: such as cement raw materials in the limestone, slag, gypsum, mineral processing field in the ore particles, according to process requirements, are also the fine grinding mill operation .
However, the workload of fine grinding operation is quite large, the heavy work, are currently carried out in the mill where. But the mill's efficiency is very low (15% to 30%), so more power consumption, energy loss seriously, grinding metal consumption is also relatively large. In order to reduce production costs, it is necessary to understand the characteristics of the mill under the premise of these operations, according to the material properties (hardness, including how much water), such as particle size and the grinding fineness of the finished product requirements, the grinding process and a reasonable choice fine grinding equipment. And existing equipment compatible with the production improvement.
Introduction of the roll crusher stone crusher, roll crusher extrusion pressure by roller to crush ore in the broken, broken bits with a broken machine. Rotating work rolls with the role of friction, will give to the roll surface of the material drawn into the crushing chamber, so that the material was to the main squeeze of the stress and broken by the rotating roller with a crushing chamber, as a broken product discharge. The crusher rollers roll surface has a smooth surface and two non-smooth roll surface. Smooth roller surface multi-processing hard materials; non-smooth surface with a trench roller or roller gear, and more coal is used as a type of broken brittle materials. Roll Crusher can be divided by the number of single-roller roll, double roll or roll crusher. Double Roll Crusher is also called on the roll crusher, the crusher is the most common. According to the speed of the roller can also be divided into fast, slow and differential roll crusher, fast speeds up to the circumference of 4-7.5m / s, slow for the 2-3m / s, differential speed roll crusher main used to handle viscous materials, mostly for two different transfer roll diameter on the roller machine. Roll crusher with the basic structure for the work roll wear leather roller, roller bearing work after a spring or hydraulic adjustment device, in addition to a transmission system, feeding and nesting devices. Rack and protection of enclosures. Impact roll crusher capacity and transmission power of the main parameters for the nip angle, particle size and feed roller speed. High-power, small nesting population of the roll crusher function effectively for super fine crushing of materials. In the roller machine developed on the basis of the high pressure roller mill, the material layer under high pressure crushing rolls to make the material properties of the applied stress and adapt to the mechanical energy can be effectively broken into, to the effect of fine grinding of materials, and high yield, energy saving, saving steel consumption, lower costs, applicable to a wide range of other advantages, I produced a double-toothed roll crusher, roller crusher (motor with a single a double)
sunshine520 posted at 2010-11-17 15:16:36
§ Mothers Day § crusher § put sth towards sth § christmas § xmas §

Better Explanations about "jaw crusher machine"

  Short vertical mill vertical roller mill, a cement raw materials, cement clinker, slag and cinder grinding process used, has a simple structure and low cost of manufacture and use characteristics. Between the body including, disc drive means and means for centering of the body structure provided with the disc apparatus to determine the center of rotation, fixed to the bottom of the rotary disc has a guide means, through the rotary disc means rotatably supported on the guide body, and the disc means gear drive connection.
  Vertical roller mill has many different forms, but it works basically the same. All of these forms of the machine comes with drum (or roller mill parts equivalent), and by external pressure grinding rolls on a vertical plate material is imposed track rollers along the horizontal circular motion of the disk compression and shear joint actions, and crushed.
  Vertical roller mill works: disc drive motor through reducer rotating air lock feeder material through the inlet falls from a central disc, while hot air from the inlet into the mill. As the disc rotates, the material under the centrifugal force, moving to the edge of the disc, the disc through the annular groove when subjected to roller compaction and crushing, the crushed material is at the edge of the disc with high-speed airflow from the air ring, large particles straight into the disc re-grinding, airflow through the upper part of the separator material when, under the effect of rotation of the rotor, the cone fell from coarse grinding disc again, together with the air passing the powder mill, collected by collecting device, namely the product containing materials in contact with water during the hot air is dried by adjusting the air temperature, the humidity of materials to meet different requirements, to achieve the required product water. By adjusting the separator can achieve the desired thickness of the different products.
penoy2014 posted at 2014-3-31 15:14:34
  Short vertical mill vertical roller mill, a cement raw materials, cement clinker, slag and cinder grinding process used, has a simple structure and low cost of manufacture and use characteristics. Between the body including, disc drive means and means for centering of the body structure provided with the disc apparatus to determine the center of rotation, fixed to the bottom of the rotary disc has a guide means, through the rotary disc means rotatably supported on the guide body, and the disc means gear drive connection.
  Vertical roller mill has many different forms, but it works basically the same. All of these forms of the machine comes with drum (or roller mill parts equivalent), and by external pressure grinding rolls on a vertical plate material is imposed track rollers along the horizontal circular motion of the disk compression and shear joint actions, and crushed.
  Vertical roller mill works: disc drive motor through reducer rotating air lock feeder material through the inlet falls from a central disc, while hot air from the inlet into the mill. As the disc rotates, the material under the centrifugal force, moving to the edge of the disc, the disc through the annular groove when subjected to roller compaction and crushing, the crushed material is at the edge of the disc with high-speed airflow from the air ring, large particles straight into the disc re-grinding, airflow through the upper part of the separator material when, under the effect of rotation of the rotor, the cone fell from coarse grinding disc again, together with the air passing the powder mill, collected by collecting device, namely the product containing materials in contact with water during the hot air is dried by adjusting the air temperature, the humidity of materials to meet different requirements, to achieve the required product water. By adjusting the separator can achieve the desired thickness of the different products.
penoy2014 posted at 2014-3-31 15:14:34

If you want to post your Explanation, please Login (Register)!

Cshu Message  Using Help  Copyright  About Us  More about "jaw crusher machine"  RSS

Copyright ©2019 Cshu www.cshu.org